Hamilton Beach OG01 Assembly And Operation Manual page 14

ASSEMBLY
STEP 4: Grill Head to Cart
1. Remove the tie wraps securing regulator hose to underside of grill head.
2. Carefully lower the grill head onto the cart. Make sure the regulator hose is hanging outside
the cart. Attach head to cart with two (2) M6 x 13 screws and two (2) M6 flat washer in the
front; two (2) M6 x 26 screws in the back as shown in Fig. 4.
14
ASSEMBLY STEPS
Fig. 4
Note regulator hose is routed
outside of cart.