Table of Contents
Advertisement
Changing the way you are warned
To change the way your TomTom ONE/XL warns you about safety cameras,
tap the Change warning preferences button.
You can then set how close you want to be to a safety camera before you
Change warning
are warned and what type of sound will be played.
preferences
For example, to change the sound that is played when you approach a fixed
safety camera, do the following:
1. Tap TomTom Safety Cameras in the Main Menu.
2. Tap Change warning preferences.
3. Tap Fixed safety cameras.
Tip: If you want to change the warning sounds for all camera types to a
single sound, tap <ALL\> instead of Fixed safety cameras in step 4 above.
4. Tap NO to avoid removing the fixed safety camera alerts.
5. Enter the time in seconds for when a warning is given before you reach
6. Tap the sound you want to be used for the warning. For example, to
7. Tap YES to save your changes.
Report button
To show the report button in the Driving View, do the following:
1. Tap TomTom Services in the Main Menu.
2. Tap TomTom Safety Cameras.
3. Tap Enable report button.
The report button is shown on left-hand side of the Driving View or, if you
are already using the quick menu, it's added to the buttons available in the
quick menu.
Reporting a new safety camera while on the move
1. Tap the report button shown in the Driving View or in the quick menu to
record the location of the camera.
2. Tap Mobile camera or Fixed camera.
3. Tap the type of camera you want to report.
Note: If the type of camera you choose has a speed restriction, you can also
enter the speed.
Reporting a new safety camera while at home
You do not need to be at the location of a safety camera to report the new
location.
A list of safety camera types is displayed. A speaker is shown next to the
speed camera types that have been set for an alert.
a camera. Then tap OK.
select a bugle sound tap on Bugle.
58
Advertisement
Table of Contents
