Installation - Brady 2461 Operator's Manual

3.0 Installation

This section explains how to connect the printer, and load it with media and
ribbon.
þ Note: When connecting the AC Power Cord or interface cables to the printer,
ensure the Power On/Off Switch is in the 'Off' position.
ΠPlace the printer on a firm, level surface.
• Turn 'Off' the Host Computer and ensure that the Power Switch on the
Printer is in the 'Off' position.
Ž Depending upon your interfacing requirements, connect the appropriate
interface cable between Host Computer and Printer; see Section 3.0.1.
• Connect the AC Power Cord to the receptacle on the back of the Printer,
and then plug the AC Power Cord into a properly grounded outlet. (The
power supply in the printer automatically detects, then adjusts to the applied
line voltage; see Section 7.0 for the acceptable voltage ranges.)
+
If connecting the printer to a network, refer to the additional
documentation supplied with the network option.
11