Outputting Cursor Position To Navigator; Displaying Cursor Position, Range And Bearing To Cursor; Visual Alarm Indications - Furuno 841 MARK-2 Operator's Manual

2.30 Outputting Cursor
Position to Navigator
Cursor position (NMEA0183 data sentence
TLL) can be output to the navigator con-
nected to this radar by pressing and holding
down the [HM OFF] key.
2.31 Displaying Cursor
Position, Range and Bearing to
Cursor
The cursor data indication at the bottom of
the display can show cursor position in lati-
tude and longitude or the range and bearing
from own ship to the cursor. You can select
the indication desired by pressing the [HM
OFF] key.

2.32 Visual Alarm Indications

This radar display various visual alarms to
alert you to error.
Table 2-1 Visual alarm indications
E r r r o
N o h e a d n i g p u s l e
N o b e r a n i g p u s l e
H e a d n i g s g i n l a
u t n r e d o f f
The heading signal visual alarm may be
cleared by pressing the [DISP MODE] key.
20
V s i u l a l a r a m
H D I S G M S I S N I G
B P I S G M S I S N I G
* * * * . a ( p p e a s r
a s h e a d n i ) g