Transport; E.g. When Moving; Transport, E.g. When Moving - Bosch WFL 2050 Operating & Installation Instructions Manual

To reduce the risk of fire or electricalshock,
DO NOT use an extention cord or an adapter to
connect the washer to the electricalpower
supply.
Inthe eventthat an earthqeakagecircuit breaker is
to be used, only usetypes markedwith the
following symbol: IZ_.
Only this symbol can guaranteecompliance with all
current regulations.
Do not insert
/ remove the mains plug with wet or
damp hands.
Handle the plug body only when removing the plug
from the socket.
Transport, e.g. when moving
Before transporting the washing machine:
- Turn off the water tap,
- Drain any residual water (refer to page 20),
- Release the water pressure in the supply hose
(refer to page 22),
- Disconnect the washing machine from the
mains.
- Dismantle the supply and drainage hose,
- Install the lower 2 transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the Drain
program to run through before starting the first
wash program.
Preparing and inserting the transport bolts
Remove the 2 lower covers.
Prepare the transport bolts:
Loosen the screw in the sleeve until the end of
the screw is level with the end of the sleeve.
Insert and tighten transport bolts I and 2. The
lug on the washing machine must be located in
the groove in the rear panel of the housing.
34