When The Program Has Ended; Unloading The Laundry - Bosch WFL 2050 Operating & Installation Instructions Manual

When the Program
has Ended
The finished control ight is flashing.
Permanent P_ess Regular/Cotton
Q rinse/spin
Q wash
ready
Turn the program selector to Off,
and, when required:
Select a program (Drain or Spin).
Press the Start button.
The wash control light comes on, and the
program starts.
The wash control light changes during the program
to rinse/spin.
At the end of the program option, turn the
program selector to Off.
Unloading the laundry
When the door locked control light goes off:
ii
Turn off the water taps.
Open the loading door.
If the loading door cannot be opened:
Wait for 2 minutes (the safety function is active)
or
there is still water in the washing machine if the no
final spin option was selected.
In this latter case, select the Drain or Spin
program.
Unload the laundry.
Check occasionally for any foreign objects (e.g.
coins, paper clips) from the drum and rubber
seal) risk of rust!
Leave the loading door open to allow the inside
of the washing machine to dry out.
18