4.5 Removing the transport
struts
Unscrew and remove the screws in
1.
the vertical transport struts using a
T20 screwdriver.
Remove the transport struts.
2.
Undo and remove the screws in
3.
the horizontal transport strut using
a T20 screwdriver.
Installation and connection en
Remove the transport strut.
4.
4.6 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
15