Track; Displaying Track; Stopping/Restarting Plotting Of Track - Furuno GP-1850WDF Operator's Manual

4. TRACK

4.1

Displaying Track

1. Press the [MENU] key to open the main
menu.
CHART SETUP OPTIONS
DISPLAY OPTIONS
GPS/DGPS/TD OPTIONS
SOUNDER SETUP OPTIONS
CONFIGURATION
DGPS 3D
Main menu
2. Press the CHART SETUP OPTIONS soft
key to open the CHART SETUP
OPTIONS menu.
CHART OFFSET
TRACK CONTROL
CHART DETAILS
DGPS 3D
Chart setup menu
3. Press the TRACK CONTROL soft key to
open the TRACK CONTROL menu.
DISPLAY TRACK ON
TRACK COLOR
PLOT
TIME INTERVAL
DIST INTERVAL
TRACK MEMORY 2000 POINTS
(MARK MEMORY) (3000) POINTS
TRACK STATUS
TRACKING
TRACK : 1000 / 2000 PTS used
MARK : 5 / 3000 PTS used
DGPS 3D
Track control menu
MENU
CHART
SETUP
RETURN
TRACK
CONTROL
WHITE
TIME
EDIT
01m00s
00.10 nm
STOP
TRACK
ERASE
T & M
RETURN
4. Press ▲ to select DISPLAY TRACK.
5. Press the EDIT soft key to show the
display track window.
6. Press ▲ or ▼ to select ON or OFF as
appropriate.
7. Press the ENTER soft key or the
[ENTER] key.
8. Press the [PLOT] key to close the menu.
The default setting is ON, which traces ship's
track in accordance with ship's movements.
Number of track and mark points used
appears in the TRACK STATUS window on
the TRACK CONTROL menu. Using the
illustration at the bottom of the page as an
example, it shows that 1000 out of 2000
track points and 5 out of 3000 mark shave
been used.
4.2 Stopping/Restarting
Plotting of Track
When your boat is at anchor or returning to
port you probably won't need to record its
track. You can stop recording the track, to
conserve the track memory, as follows:
1. Press the [MENU] key followed by the
CHART SETUP OPTIONS and TRACK
CONTROL soft key.
2. Press the STOP TRACK soft key. The
indication "TRACKING" in the TRACK
STATUS window changes to "NOT
TRACKING".
On the plotter display, H icon appears.
To restart recording the track, press the
START TRACK soft key at step 2 in the
above procedure.
4-1