Synchronise Appliances; Add The Receiver To The Tv Home Screen - Philips PFS0001 User Manual

Synchronise appliances

Your TV comes with EasyLink set to On for automatic synchronisation. If this set-
ting is set to Off, you need to set it back to On.
To operate the satellite receiver, you need to set EasyLink Remote Control to On.
.
1. Press Home
2. Select Setup > Installation > Preferences > EasyLink and set it to On.
3. Select EasyLink Remote Control and set it to On.
4. Press Home to close the menu.
5. Select Watch TV and press OK.

Add the receiver to the TV Home screen

Add the satellite receiver to the TV Home screen for easy selection.
1. Press Home.
2. Select Add your devices and press OK.
3. Press OK to start.
4. Select with the arrows the correct icon and press OK.
5. Select with the arrows the HDMI connector you used to connect the receiver and
press OK.
6. Press OK to close.
Now start the first-time receiver installation, see page 60.
53
Operation