Connecting Your Adsl Line - Belkin High Speed ADSL2+ Modem User Manual

Connecting your Modem
6. Select "Search
for the best driver
for your device.
(Recommended)." and
click "Next"
7. Place a tick next to
"CD-ROM drive" and
click "Next"
8. Click "Next" on the
following screen
8
Connecting your Modem
9. Once the installer has
finished, click finish.

Connecting your ADSL Line

Connection for the Modem to the ADSL line varies by country and
region. Typically it involves line filter or a line filter with built-in splitter
to allow simultaneous use of ADSL service and telephone service on
the same telephone line. Please read the following steps carefully and
select appropriate method.
1. If your telephone service and ADSL service are on the same
telephone line, ADSL line filters are needed for each telephone
and device, such as answering machine, fax machine, and caller
ID display. Additional splitters may be used to separate telephone
lines for telephone and the Modem.
Note: Do not connect the ADSL line filter between the wall jack
and the Modem—this will prevent ADSL service from reaching the
Modem.
2. If your telephone service and ADSL service are on the same
9 9
1
2
3
4
5
6
7