Belkin ADSL Modem with Wireless-G Router F5D7632UK4 User Manual page 21

Manually Configuring your Router
DHCP Server
The DHCP server function makes setting up a network very easy
by assigning IP addresses to each computer on the network
automatically. The default setting is "On". The DHCP server can
be turned OFF if necessary; however, in order to do so, you must
manually set a static IP address for each computer on your network.
To turn off the DHCP server, select "Off" and click "Apply Changes".
IP Pool
The range of IP addresses set aside for dynamic assignment to the
computers on your network. If you want to change this number, you
can do so by entering a new starting and ending IP address and
clicking on "Apply Changes". The starting IP address must be lower in
number than the ending IP address.
Lease Time
The length of time the DHCP server will reserve the IP address for
each computer. We recommend that you leave the lease time set to
"Forever". The default setting is "Forever", meaning that any time
a computer is assigned an IP address by the DHCP server, the IP
address will not change for that particular computer. Setting lease
times for shorter intervals such as one day or one hour frees IP
addresses after the specified period of time. This also means that a
particular computer's IP address may change over time. If you have
set any of the other advanced features of the Router such as DMZ
or client IP filters, these are dependent on the IP address. For this
reason, you will not want the IP address to change.
Local Domain Name
You can set a local domain name (network name) for your network.
There is no need to change this setting unless you have a specific
advanced need to do so. You can name the network anything you
want such as "MY NETWORK".
19 19
1
2
3
4
5
6
7
8
9
10