Table of Contents
Advertisement
Available languages
Available languages
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
Pliers that open to 1
(3.95 cm)
Parts supplied:
A
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
Tools needed for securing the drain hose and leveling
the washer:
Adjustable or open end
wrench
" (14 mm)
Level
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
2
INSTALLATION REQUIREMENTS
"
Flashlight (optional)
C
B
Wood block
Ruler or measuring tape
B
Tools and Parts
Alternate Parts
Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
If You Have:
Laundry tub or
standpipe taller
than 96" (2.4 m)
1" (2.5 cm)
diameter
standpipe
Overhead sewer
Floor drain
Water faucets
beyond reach of fill
hoses
Drain hose too
short
Lint clogged drain
You Will Need to Buy:
Sump pump system (if not already
available)
1 " (3.2 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter,
Part Number 280130
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Kit Part Number 280131
Drain protector, Part Number 367031
Advertisement
Table of Contents
