Outside Top Exhaust; Attach Mounting Plate To W;Dl - GE JVM1490 Installation Instructions Manual

Installation Instructions
OUTSIDE TOP EXHAUST
(Vertical Duct)
INSTALLATION OVERVIEW
A1. Attach Mounting Plate to Wall
A2. Prepare Top Cabinet
A3. Install Adapter
A4. Mount Oven
A5, A(!just Exhaust Adaptor
A6, Connect Ductwork
I-_ ATTACH THE MOUNTING
PLATE TO THE WALL
Attach the plate to the wall using toggle bolts.
At least one wood screw IlltlSt be used to attach the
plate to a wall stud.
[]Remove the toggle wings fl'om the bolts.
[]Insert the bolts into the mounting plate through
the holes designated to go into drDvall and
reattach the toggle wings to :Y," onto each bolt.
To use toggle bolts:
Spacingfor Toggles
MoreThanWall
-@H,_i*_Th ckness
Mounting
Plate,
Bolt End
_ Place the mounting plate against the wall and
insert the toggle wings into the holes in the wall
to motmt the plate.
NOTE: Betore tightening toggle bolts and wood
scre_, make sm'e the tabs on the mounting plate
touch the bottom of the cabinet when ptlshed
flush against the wall and that the plate is properly
centered trader the cabinet,
CAUTION: Be careflfl to axoid I)inchin'*_ fingers
between the back of the motmting plate and the wall,
_ Tighten all bolts, Pull the plate awax from the wall
to help tighten the bolts,
12