Aliguiug The - GE JVM1490 Installation Instructions Manual

Installation Instructions
ALIGNING THE WALL PLATE
Drawa Vertical
Lineon Wall
-<--from Centerof
TopCabinet
HoleC
CAUTION: _,,Vear gloves
to axoid cutting fingeI5 on
sharp edges.
o oo
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
o o o o o oio o o oo ooo
Area E
H01e D
[]Draw a vertical line on tile wall at tile center of tile
30" wide space.
[]Use tile mounting plate as the template for tile rear
wall. Place the mo/mting plate on the wall, making
sure that the tabs are touching the bottom of the
cabinet or the level line drawn in Step C for cabinets
with front overhm_g. Line up the notch mid center line
on the mounting plate to the center line on the wall.
_ \._q/ile holding the mounting plate with one hand,
draw drcles on the wall at holes A, B, C and D (see
illustration above/actual plate marked with arrows).
Four holes must be used for mounting.
[]
NOTE: Holes C and D are inside area E. If neither
C nor D is in a stud, find a stud somewhere in area E
and draw a filil/ circle to line up with the stud. It is
important to use at least one wood screw mounted
firmly in a stud to support tile weight ot tile oven.
Set the mounting plate aside.
Drill holes on the drcles. If there is a stud, drill a '_A¢_"
hole tot wood screws. For holes that don't line up with
a stud, (hill a %" hole fin" toggle bolts.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
10