Adjust The Exhaust Adaptor; Connecting Ductwork - GE JVM3660 Installation Instructions Manual

Installation Instructions
Cabinet Front
v,,/_ Cabinet Hottom Shelf
_'__;_---A FillerBlock
| _/P T Eqa'valeetto
i t7//HIII,v!71II
/ °Ofe_:hbinet
J. ll:MYIr I!_ .__,_Recess
+o,:,,,+o,o+ +o ow
' Microwave O ven Top
[_ Attach the microwave oven to the top cabinet.
[] Insert 3 self:aligning screws
through outer top cabinet
holes. *iilrn two full turns on
each
screw.
[]Tighten right
center screw
completely.
[] Tighten the remaining three screws to the top
of the microwave oven. (While dghtening screws,
hold the microwave oven in place against the wall
and the top cabinet.)
[] Install grease filters. See the Owner's Manual
packed with the microwave.
[-_ ADJUST THE EXHAUST
L_I
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Hack of
Blower Plate Damper Microwave
s \
Side-to-Side
Adjustment,Slide the
ExhaustAdaptoras
Needed
I-_ CONNECTING DUCTWORK
HouseDuct
_ Extend the house duct down to connect to
the exhaust adaptor.
[] Seal exhaust duct joints using duct tape.
14