Adjust The Exhaust Adaptor; Connecting Ductwork - GE JVM7195 Installation Instructions Manual

Installation Instructions
_ MOUNT THE OVEN {continued)
[_ Attach the oven to the top cabinet.
[_ Insert 2 self-aligning screws
(¼"-28 x 2 sA')through outer
top cabinet holes. Turn two full
turns on each screw.
Cabinet Front
Cabinet Bottom Shelf
FillerBlock
_This distance
--]_Equivalent /can NOT
exceed 2"
I i° Depth /to ensure
I of Cabinet |proper
_installation
-- Self-Aligning Screw
Oven Top
[] Tighten the outer two screws to the top of the oven.
(While tightening screws, hold the oven in place
against the wall and the top cabinet.)
,/
.............................................................................................. 111 i _ ],
[_ Install grease filters. See the Owner's Manual
packed with the oven.
ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
Back of Oven
_] CONNECTING DUCTWORK
House Duct
[_ Extend the house duct down to connect to
the exhaust adaptor.
[_ Seal exhaust duct joints using duct tape.
14