Adjust The Exhaust Adaptor; Connecting Ductwork - GE Spacemaker JVM1630CH Installation Instructions Manual

MOUNT THE OVEN
A4.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
3
Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
4 Tighten the two screws to the top of the oven
completely. (While tightening screws, hold the
oven in place against the wall and the top cabinet.)
5 Install grease filters. See the Owner's Manual
packed with the oven.
Installation Instructions
(continued)
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
14
A5. ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
A6.

CONNECTING DUCTWORK

1 Extend the house duct down to connect to
the exhaust adaptor.
2 Seal exhaust duct joints using duct tape.
Damper
Back of
House Duct
Oven