Adjust The Exhaust Adaptor; Oven; Ductwork - GE AVM4160 Installation Instructions Manual

Installation Instructions
| MOUNT THE MICROWAVE OVEN
{cont.)
[] Insert a self-aligning screw through top-center
cabinet hole, Temporarily secure the microwave
oven by turning the screw at least two full
turns after the threads have engaged, (It will be
completely tightened later,) Insert 2 self-aligning
screws (W'-28 x 21¼,,)through outer top cabinet
holes, Turn two full turns on each screw,
J
J
Cabinet Front
Cabinet Bottom Shelf
Filler Block
_. This distance
--_quivalent |can NOT
I to Depth |exceed 2"
to ensure
I of Cabinet
| proper
!_' Recess _ installation
-- Self-Aligning Screw
Microwave Oven Top
[] Tighten the three screws to the top of the microwave
oven, (While tightening screws, hold the microwave
oven in place against the wall and the top cabinet,)
_3 Install grease filters, See the Owner's Manual packed
with the microwave oven,
ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct,
Damper
Back of
Microwave
Oven
| CONNECTING DUCTWORK
House Duct
[]Extend the house duct down to connect to
the exhaust adaptor,
_] Seal exhaust duct joints using duct tape,
19