Primary And Secondary Ide Master/Slave - Asus A8N-SLI Premium Manual

4.3.5 4.3.5 4.3.5

Primary and Secondary IDE Master/Slave

Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave
4.3.5 4.3.5 Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave
While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press <Enter> to display the IDE device information.
Main
PIO Mode
UDMA Mode
Primary IDE Master
Access Mode
UDMA Mode
Capacity
Cylinder
Head
Sector
Transfer Mode
F1:Help
ESC: Exit
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user-configurable. These items show N/A if no IDE device is installed in the
system.
PIO Mode PIO Mode PIO Mode
PIO Mode PIO Mode
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]
UDMA Mode UDMA Mode UDMA Mode UDMA Mode UDMA Mode
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/
IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/
Slave [Auto] Slave [Auto] Slave [Auto] Slave [Auto] Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the BIOS automatically fills in the correct values for
the remaining fields on this sub-menu. If the hard disk was already
formatted on a previous system, the setup BIOS may detect incorrect
parameters. Select [Manual] to manually enter the IDE hard disk drive
parameters. If no drive is installed select [None].
Configuration options: [None] [Auto] [Manual]
4 - 1 6 4 - 1 6 4 - 1 6 4 - 1 6 4 - 1 6
Phoenix-Award BIOS CMOS Setup Utility
Primary IDE Master
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
13579 MB
26310
16
63
UDMA 4
: Select Item -/+: Change Value
: Select Menu Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
select
F5: Setup Defaults
F10: Save and Exit
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p