Asus A8N-SLI Premium Manual page 151

T I P : T I P :
T I P : T I P : T I P : For server systems, we recommend using a lower array block size.
For multimedia computer systems used mainly for audio and video
editing, we recommend a higher array block size for optimum
performance.
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press <Enter> to set the
first drive of the RAID set.
d. Repeat step c to set the second, third, and fourth drive. The
number of available drives depend on the installed and enabled
physical drives in the system.
e. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to confirm or <N> to return to the Main Menu.
Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
configuration utility
main menu, select
C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t
then press <Enter>. The
following sub-menu
appears.
R A I D 1 R A I D 1
2. Select R A I D 1 R A I D 1 then R A I D 1
press <Enter> to
display the following.
A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m
A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
MAIN MENU
Auto configuration
Manual configuration
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
RAID0 RAID0
RAID1 RAID1
RAID10 RAID5
SPARE DRIVE RAID10
SPARE DRIVE
JBOD (Single)
5 - 3 3 5 - 3 3 5 - 3 3
5 - 3 3 5 - 3 3