Attachments - Sears Kenmore Vacuum Cleaner Owner's Manual

TTACHMENTS
ATTACHMENTS ON HANDLE
NOTE: If the
POWER-MATETMis
attached, turn cleaner
off before removing
handle from wands.
1. Press lock buffon,
then pull to remove
handle from wand,
If your model has the optional feature of a handle
release, press it in similarly.
2. Slide attachments
firmly on handle as
needed. See chaff
below.
ATTACHMENTS ON WANDS
1. To remove wands
from POWER-MATETM,
lock wands in straight-
up position,
Wand Quick
Release Pedal
m
2. Press wand release
pedal with foot and
pull the wands straight
up out of POWER-
MATEm.
The POWER-MATETMplug
and cord do not have to
be removed to use
attachments on the
wands,
3. Put attach-
ments on wands
as needed. See
chaff below.
TTA CHMENTUSE
ATTACHMENT
DUSTING BRUSH
CREVICE TOOL
FABRIC BRUSH
FLOOR BRUSH
(Some Models)
POWER-MATE nm
Furn_um*
X
X
X
HANDI-MATE TMJR.
(Some Models)** _ X
POWER-MATE_ JR. _ _
(Some Models)** X
Between
Cushions*
X
Drapes*
X
CLEANING AREA
Bars
Stairs Floors
x x
X***
X
X
Carpeted
Floors
X
Rugs
X
Walls
X
X
Always clean attachments before using on fabrics. ** HANDI-MATI_MJR. and POWER-MATE "_ JR. attachment Instructions are Included with Jhe products.
*** 3-way On/Off switch should be In FLOOR position.
NOTE'.When separating wands, depress lock button completely before pulllng wands apart. If wand lock button is difficult to depress, push the two wands more tightly
together to line up De lock button with the hole. Depress lock button and then pull wands apart.
0