Advertisement
Available languages
Available languages
LIGHT BULB CHANGING
WARNING
Electrical Shack Or Personal injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
Do not plug in or turn on until the vacuum
1. Remove
PowerMate
® cover
as shown
in BELT
CHANGING
AND
AGITATOR
CLEANING
section.
----_Pull
out to
I
left side
._
2. Remove
the light
bulb
by pulling
straight
out.
CAUTION
Do not use a bulb rated over 9W (13V).
During
extended
use, heat from the
bulb could overheat
surrounding plastic
_arfs.
Push in
to right
3. To replace
the
light bulb,
carefu!ly
insert fully into slot.
4. Reinstall PowerMate ® cover as shown in
BELTCHANGING AND AGITATOR CLEANING
section.
NOTE:
See PARTS AND
FEATURES for Bulb
number.
AGITATOR SERVICING
TO CHECK THE BRUSHES
When brushes are worn to the level of the
base support
bars, replace
the agitator
assembly.
New Brushes
Worn Brushes
Bose
Support
Bar
TO REPLACE AGITATOR
ASSEMBLY
1. Remove PowerMate cover, belt and
agitator assembly. See "To Remove Belt" in
BELTCHANGING AND AGITATOR
CLEANING (page 24-25).
2. Replace agitator
assembly.
See the
separate
repair parts list for part number.
3. Reinstall belt and PowerMate
cover. See
"To replace
belt" in BELT CHANGING
AND
AGITATOR
CLEANING
(page 24-25).
= 26 =
Advertisement
