Advertisement
Available languages
Available languages
BAG CHANGING
For best cleaning results, the dust bag should be changed often. The CHECK BAG indicator
will come on when the bag needs to be changed or the airflow is blocked.
NOTE: Use replacement dust bag No. 20-50403, see part number detail in REPLACEMENT
PARTS(page 7).
REMOVING DUST BAG
1. Turn off and unplug vacuum cleaner.
2. Remove hose from canister. (See
ASSEMBLY INSTRUCTIONS, page 9).
3. Pull hood release out and up.
4. Lift canister hood.
_Hood
5. Pull bag out of the
red bag mount and
dispose of dust bag.
NOTE: Check the
motor safety filter
and replace, if
necessary.(See
MOTOR SAFETY
FILTERCHANGING,
page 22).
NOTE: The red bag mount will flip forward
after removing bag. This will prevent the
hood from closing until a new bag is
installed.
REPLACING DUST BAG
Note: DO NOT bend or crease the middle
of the cardboard when installing the bog
into the bog mount slots.
1. Verify that vacuum cleaner is
unplugged.
2. Rotate red bag
mount down and
install bag into slots
per illustration,
pushing down until
the cardboard tab
locks into position
and the holes align.
3. Tuck the bag securely
into the bag cavity
so that none of the bag is able to be
pinched
by the hood.
4. Close and latch canister hood.
5. Insert hose into canister until it snaps in
place. See ASSEMBLY INSTRUCTIONS,
page 9-10).
CAUTION
NEVER EMPTY OUT AND REUSEA DUST
BAG. Very fine materials, such as carpet
freshener, face powder, fine dust, plaster,
soot, new carpet llnt, etc. can clog the bag
and cause it to burst before it is full and
may cause damage to vacuum cleaner
motor. Change bag more often when vac-
uuming these materials.
a 21 a
Advertisement
