Power-Mate ® Care; To Remove Belt - Kenmore 116.23104C Use & Care Manual

POWER-MATE ® CARE
Always follow all safety precautions when per-
forming maintenance to the Power-Mate ®. WARNING
Electrical Shock Or Personal Injury Hazard
Turn off and unplug electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
TO REMOVE BELT
1. Turn Power-Mate ®
upside down.
'2. Unscrew the two
(2} Power-Mate ®
cover screws.
3. Turn Power-
Mate ® right side
up. Press handle
release pedal and
lower the swivel.
Lift rear latches up.
Side ear
Latch Latches
4. To remove cover,
grasp the sides and pull
out.
5. Lift agitator
assembly out and
remove worn belt.
6. Check and clean end cap areas. See
AGITATOR ASSEMBLYfor picture of complete
agitator assembly.
=18=