Power-Mate S Care - Kenmore 116.26212 Owner's Manual

POWER-MATE s CARE
Always follow all safety precautions when
performing maintenance to the Power.-
Mate ®,
li, WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
TO REMOVE BELT
3. Turn Power-
Mate s right side up,
Press handle
release pedal and
lower the swivel,
Lift rear latches up.
1, Turn Power-
Mate _ upside
down.
2. Unscrew the two
(2) Power-Mate s
cover screws.
4o To remove cover,
grasp the sides and pull
out,
5, Depress tabs
on rear of
agitator cover
and rotate
forward to
release from the
Power-Mate _
base,
Agitator
Cover
End Cap
Tabs
6. Lift agitator
assembly out
and remove
worn belt.
7. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly
16