Table of Contents
Advertisement
Note
• The AV receiver can output audio and video signals from the AUX Input jacks to the VCR/DVR OUT jacks.
*1
Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn't have it, you'll need a commercially
available phono preamp. If your turntable has a moving coil (MC) type cartridge, you'll need a commercially available MC head
amp or MC transformer as well as a phono preamp. See your turntable's manual for details.
*2
When you connect your personal computer to PC IN and select PC Input selector, video of the Personal computer is output from
HDMI OUT. However, if you have assigned HDMI IN to the PC input selector, the AV receiver will output signals from HDMI IN
instead of signals from PC IN. To get the signals output from PC IN, select "- - - - -" for "PC" in the "HDMI Input" setting
➔
(
)
44
.
• With connection
, you can listen and record audio from the external components while you are in Zone 2. You can listen and record
audio from the external components in the main room; you can listen to the audio in Zone 2 as well.
• With connection
, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use
•
if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to con-
With connection
,
nect the main stereo.
■
How to record the video
With the connections described above, you cannot record the video through the AV receiver. To make a connection for
video recording
(➔
36).
Connecting Integra/Onkyo
Step 1:
Make sure that each Integra/Onkyo component is con-
nected with an analog audio cable (connection
18).
hookup examples)
(➔
Step 2:
Make the
connection (see illustration below).
Step 3:
If you're using an RI Dock, or cassette tape deck,
change the Input Display
(➔
With
(Remote Interactive), you can use the following
special functions:
■
System On/Auto Power On
When you start playback on a component connected via
while the AV receiver is on Standby, the AV
receiver will automatically turn on and select that com-
ponent as the input source.
■
Direct Change
When playback is started on a component connected via
, the AV receiver automatically selects that compo-
nent as the input source.
■
Remote Control
You can use the AV receiver's remote controller to con-
trol your other
-capable Integra/Onkyo components,
pointing the remote controller at the AV receiver's
remote control sensor instead of the component. You
must enter the appropriate remote control code first
(➔
71).
Components
in the
25).
Note
• Use only
cables for
connections.
with Integra/Onkyo players (DVD, CD, etc.).
• Some components have two
one to the AV receiver. The other jack is for connecting addi-
tional
-capable components.
• Connect only Integra/Onkyo components to
ing other manufacturer's components may cause a malfunction.
• Some components may not support all
the manuals supplied with your other Integra/Onkyo compo-
nents.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change
functions do not work.
REMOTE
CONTROL
e.g., CD player
e.g., DVD player
and
.)
cables are supplied
jacks. You can connect either
jacks. Connect-
functions. Refer to
IN
L
R
TV/CD
IN
L
R
BD/DVD
R
L
ANALOG
AUDIO OUT
R
L
ANALOG
AUDIO OUT
En
19
Hide quick links:
Advertisement
Table of Contents
