Electrolux EI30GF35JSA Use & Care Manual page 9

Surface Cooking
Before setting surface
burners (con't)
On round style burners, the burner cap lip
(Figure 1,) should fit snug into the center of burner
head and rest level. Refer to Figures 2 and 3 for
correct and incorrect burner cap placement. Once
in place, you may check the fit by gently sliding the
burner cap from side to side (Figure 4) to be sure it
is centered and firmly seated. When the burner cap
lip makes contact inside the center of the burner
head you will be able to hear the burner cap click.
Please note that the burner cap should NOT move
off the center of the burner head when sliding from
side to side.
Check and be sure that all oval style burner caps
are correctly in place on oval burner heads.
Installing burner grates
Make sure the burner grates are properly placed on
the cooktop before using the surface burners. The
grates are designed to rest inside the recess on the
cooktop.
To install burner grates, place grates flat-side down
and align into the cooktop recess. Grates should
rest flush against each other and against the sides
of the recess (see Figure 5).
burner cap
_i _ ii_ i
Correct burner cap Incorrect burner cap
placement placement
Fig. 2 Fig. 3
Fig. 4
ii ii
i i i i
_ _iii iji kl i/iiiiii
il _Lil i !iii! ki&_i_
_!_ burner cap lid
burner head
Fig. 1
i_ il i i
Fig. 5
ii iii_ ii
il _ ii ii_i_ i
i i i