Electrolux EI30GF35JSA Use & Care Manual page 38

Hide thumbs Also See for EI30GF35JSA:
Table of Contents

Advertisement

Self-clean
Setting
self-clean
A self-cleaning oven automatically
cleans itself
using much higher temperatures than those used
for cooking. The self-clean feature eliminates soils
completely or reduces them to a fine powdered ash
that you can later easily wipe away with a damp
cloth.
The self-clean function provides 3 different clean
time settings for self-cleaning. Set clean for 2 hours
for light, 3 hours for normal or 4 hours for heavier
soils.
To start self-clean:
Step
Press
1.
The oven should be empty and all
oven racks removed. Remove all
items from the cooktop. Be sure the
oven door is completely
closed.
2.
Press self clean once for a 3-hour
.,£.
clean time (Figure 1); twice for a 4-
"m"
hour clean time (Figure 2) or 3
times for a 2-hour clean time
(Figure 3).
3.
Press START.
4>
Fig. 1
Fig. 2
Fig. 3
Once active, the door lock motor will begin locking
the oven door. "door Loc" (Figure 4) will appear in
the display. DO NOT try to open the oven door
when the "door Loc" message is on (allow about
15 seconds for the oven door to completely lock).
DO NOT force the oven door open. This could
damage the door locking system. Once the oven
door is locked the "door Loc" message will turn off
and "CLn" (Figure 5) will remain in the display for
the entire self-clean cycle.
Fig. 4
Fig. 5
When the self clean cycle has finished:
,
,
The time of day and "Hot" will show in the
display (Figure 6).
Once the oven has cooled (about 1 hour) and
"Hot" is no longer displayed, the "door OPn"
message will appear (Figure 7). When this
message turns OFF the door has finished
unlocking.
Fig. 6
Fig. 7
3.
When the oven is cool, wipe away any residue
or powdered ash from the oven interior using a
damp cloth or paper towel.
. A self-clean cycle will not start if the control
. When the self-clean feature iS act!ve, you may
check the amount of clean time remaining by
J,
press ng the self,clean
"_! € keypad once:
- Ira self-clean cycle was started but d!d not
finish due to a power failure, your oven may not
have completely cleanedl

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents