Functions; Playback - Magnavox MSD126 Owner's Manual

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier
and any other equipment which
are connected to this unit. Make
sure the TV and audio receiver
(commercially available) are set
to the correct channel.
1 Press [STANDBY-ON] to turn
on the DVD/CD Player.
2 Press [OPEN / CLOSE A] and
insert a disc with label facing up.
3 Press [PLAY B ] to start
playback.
4 Press [STOP C ] to stop
playback.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for more details.
Resume
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information will be kept even when unit is in standby mode.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• On DVDs, set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
To use [PREV H], [NEXT G] on this unit
Press once to skip a chapter or track to a desired point.

Functions

STANDBY
ON
PREV PLAY
2 1 3
Hint
2
STANDBY–ON OPEN/CLOSE
SEARCH
1
DISPLAY MODE
AUDIO
1 2 3
SUBTITLE
4 5 6
ANGLE
7 8 9
REPEAT CLEAR
0 +10
TIP:
A-B PAUSE SKIP
You can change the On-Screen language in "PLAYER MENU"
3
SLOW
setting. (Refer to page 14.)
PLAY
REV FWD
4
STOP
SETUP TOP MENU MENU
Fast Forward / Reverse Search
MODE ENTER
ZOOM RETURN
Press [FWD g] or [REV h] repeatedly during play-
back to select the required forward or reverse speed.
To continue playback, press [PLAY B].
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H], [NEXT G] on this unit
will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Hint
Slow Forward / Reverse
Resume ON
Press [FWD g] or [REV h] repeatedly in the pause
Press 'PLAY' to play from here.
mode to select the required forward or reverse speed.
To play the beginning,
press 'STOP' first and then 'PLAY'.
To continue playback, press [PLAY B].
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H], [NEXT G] on this unit in the
pause mode will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Hint
Zoom
1) P ress [ZOOM] repeatedly during playback to select the
2) U se [K / L / s / B] to slide the zoomed picture across the screen.
) T o exit zoom function, press [ZOOM] repeatedly to select OFF.
Hint
-9-
NEXT STOP OPEN/CLOSE
4 2 2
Lights up when power is on.
• A "prohibited icon" may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or  due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the 2nd
layer. This is not a malfunction.
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), (x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and (x0).
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and (1/2).
• Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 14-15.)
required zoom factor: x2, x4 or OFF.
x2
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [REV h]
repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
POWER PLAY
IR
x4
x2(x4) to the zoomed position guide.
P-SCAN
1
E
1
EN