Functions; Playback - Magnavox MWD200G Owner's Manual

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other
equipment which are connected to this unit.
Make sure the TV and audio receiver (commer-
cially available) are set to the correct channel.
1
Press [STANDBY-ON] to
turn on the DVD/CD Player.
2
Press [OPEN / CLOSE]
and insert a disc with label
facing up.
3
Press [PLAY B ] to start
playback.
4
Press [STOP C ] to stop
playback.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
Press [MENU] to call up the DVD menu.
•
Press [TOP MENU] to call up the title menu.
•
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Hint
• To cancel resume, press [STOP C] one more time during the stop
mode.
• The resume information will be kept even when unit is in standby
mode.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed during the pause mode.
To continue playback, press [PLAY B].
Hint
• On DVDs, set "STILL MODE" to "FIELD" in the Display menu if pictures in the
pause mode are blurred. (Refer to pages 14-15.)

Functions

STANDBY–ON OPEN/CLOSE
SEARCH
1
DISPLAY MODE
AUDIO
1 2 3
SUBTITLE
4 6
5
ANGLE
7 8 9
REPEAT CLEAR
0 +10
A-B
PAUSE SKIP
SLOW
3
PLAY
REV FWD
4
STOP
2
SETUP TOP MENU MENU
MODE ENTER
ZOOM RETURN
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
2
Hint
2
• A "prohibited icon" may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or  due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the 2nd
layer. This is not a malfunction.
TIP:
You can change the On-Screen language in "PLAYER MENU" set-
ting. (Refer to page 14.)
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly dur-
ing playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B]
Hint
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), (x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and (x0).
Slow Forward / Reverse
Press [FWD g] or [REV h] repeatedly
during the pause mode to select the required
forward or reverse speed.
To continue playback, press [PLAY B].
Hint
• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8) and (1/2).
• Set "STILL MODE" to "FIELD" in the Display menu if pictures in the slow play-
back mode are blurred. (Refer to pages 14-15.)
Zoom
1) P ress [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2
2) U se [K / L / s / B] to slide the zoomed picture across
the screen.
) T o exit zoom function, press [ZOOM] repeatedly to select OFF.
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k], [FWD g] or
[REV h] repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
-9-
OPEN/CLOSE PLAY STOP
STANDBY-ON
2 3 4 1
Lights up when power is on.
1
E
.
x4
x2(x4) to the zoomed position guide.
EN
IR
1