Table of Contents
Advertisement
Connection to an Audio System
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
2CH AUDIO OUT
(Analog)
Setting
Connection
Connecting to Stereo System.
* To complete these settings, refer to pages 17-19.
Hint
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15 cm) or more when storing them.
• Use a cable which is 9.8 feet (3 m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Rear Terminals
OPTICAL jack
Connect an optional digital audio cable
here through the optional digital audio in
jack of a decoder or audio receiver.
COAXIAL jack
Connect an optional coaxial digital
audio cable here through the coaxial
digital audio in jack of a decoder or
audio receiver.
decoder, MD deck
Analog audio
input jacks
L
R
2CH AUDIO
OUT
L
R
* To complete these settings, refer to pages 17-19.
Hint
SETUP > QUICK >
DOLBY DIGITAL
• The audio source on a disc in a Dolby Digital 5.1 channel surround
PCM
• By hooking this unit up to a Multi-channel Dolby Digital decoder, you
• Playing a DVD using incorrect settings may generate noise distortion
HDMI OUT jack
Use a HDMI connection cable (supplied)
to connect to a display with an HDMI
compatible port.
DIGITAL OUT
HDMI OUT
2CH AUDIO
OUT
(PCM/BITSTREAM)
L
OPTICAL COAXIAL
R
2CH AUDIO OUT jacks
Connect the supplied
audio cables here
through the audio in
jacks of a television or
other audio equipment.
– 8 –
Method 2
Dolby Digital
or DAT deck
Optical cable
(commercially
available)
DIGITAL
AUDIO OUT
Connection
Connecting to a Dolby Digital decoder for
Dolby Digital audio output.
Connecting to the other equipment (an MD deck
or DAT deck etc.) without Dolby Digital decoder.
Hint
format cannot be recorded as digital sound by an MD or DAT deck.
can enjoy high-quality Dolby Digital 5.1 channel surround sound as
heard in the movie theaters.
and may also damage the speakers.
COMPONENT
S-VIDEO
VIDEO OUT
OUT
Y
C
/P
R
R
VIDEO
C
/P
B
B
OUT
VIDEO OUT jack
Connect the supplied yellow
video cable here through the
TV's video in jack.
OPTICAL
COAXIAL
Digital
audio input
jack
Audio Coaxial
Digital cable
(commercially
DIGITAL OUT
(PCM/BITSTREAM)
available)
OPTICAL COAXIAL
SETUP > QUICK >
Setting
DOLBY DIGITAL
BITSTREAM
PCM
COMPONENT VIDEO OUT jacks
Connect optional component video
cables here through the component
video in jacks of a television.
S-VIDEO OUT jack
Connect an optional
S-Video cable here
through the S-video in
jack of a television.
Hint
Hint
• When there is video out-
put from the HDMI OUT
jack, no signal is output
from the COMPONENT
VIDEO OUT jacks.
EN
Advertisement
Table of Contents
