Connection To An Audio System; Rear Terminals - Magnavox MWD200G Owner's Manual

Connection to an Audio System

Playing 2 channel audio
Stereo system
AUDIO
Audio cable
(supplied)
This unit
Hint
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.

Rear Terminals

L
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL R
Analog audio
input jacks
L R
L
AUDIO OUT
AUDIO OUT
(Analog)
R
S-VIDEO
VIDEO
OUT
OUT
Playing Dolby Digital
(Multi-channel audio)
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Connection
Connecting to a Dolby Digital decod-
er for Dolby Digital audio output.
Connecting to the other equipment
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Hint
• The audio source on a disc in a Dolby Digital Multi-channel Surround format
cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy
high-quality Dolby Digital Multi-channel Surround sound as heard in the movie
theaters.
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.
AUDIO OUT (analog) jacks
Connect the supplied audio cable (red/white) here through the
audio in jacks of a TV or other audio equipment.
VIDEO OUT jack
Connect the supplied video cable (yellow) here through the TV's
video in jack.
S-VIDEO OUT jack
Connect an optional S-Video cable here through the S-video in
jack of a TV.
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the
coaxial digital audio in jack of a decoder or audio receiver.
-7-
COAXIAL
Digital audio
input jack
DIGITAL
AUDIO OUT
COAXIAL
SETUP > QUICK>
Setting
DOLBY DIGITAL
BITSTREAM
PCM
EN