Connection To An Audio System; Rear Terminals - Magnavox MDV3000/F7 Owner's Manual

Connection to an Audio System

Analog Audio Connection
stereo system
Audio
This unit
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at
your local store.

Rear Terminals

1 HDMI OUT jack
Use to connect a TV with an HDMI compatible port with an HDMI cable.
2 DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial input jack of a decoder or audio receiver.
3 AUDIO OUT jacks
Connect an audio cable here through the audio input jacks of a television or other audio device.
4 COMPONENT VIDEO OUT jacks
Connect a component video cable here through the component video input jacks of a television.
5 S-VIDEO OUT jack
Connect an S-video cable here through the S-video input jack of a television.
6 VIDEO OUT jack
Connect a video cable here through the video input jack of a television.
EN
analog audio
input jacks
L R
RCA audio cable
L
AUDIO OUT
R
AUDIO
OUT
1 2 3 4 5
6
Digital Audio Connection
Dolby Digital decoder,
MD deck or DAT deck
digital audio
coaxial cable
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 15,17.
Note:
• The audio source on a disc in a Dolby Digital multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi-channel surround
sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
• "Digital Out" setting is not available while HDMI audio is
output.
– 8 –
COAXIAL
digital audio
input jack
DIGITAL
AUDIO OUT
Setup > Audio>
Setting
Digital Out
Bitstream
LPCM