Denso Power Net Terminal BHT-103 Manual page 17

In the Set System
Communication
There are four settings in the
press Enter
In the Optical
setting and press
In the Set Protocol Menu, unlike the previous menus, all the settings will need to be
entered. The
Press 1 for or move cursor to the
Press 2:
Press 3:
Press 4:
Supported Equipment Manual
menu, there are eight settings. Cursor down or press 5:
and press Enter.
Set Communication
.
menu, there are two settings, Parameter and Protocol
.
Enter
fields and settings are found in the table below.
Set Protocol
and move cursor to
<H. Parity>
<Linkup Time>
and move cursor to
<Field Space>
and move cursor to
•
March, 2006
SYSTEM MENU
1: EXECUTE PROGRAM
2: DOWNLOAD
3: UPLOAD
4: SET SYSTEM
5: TEST
6: VERSION
7: FTP
8: RF
SET SYSTEM
1: EXECUTE PROGRAM
2: DISPLAY
3: DATE /TIME
4: BARCODE
5: COMMUNCATION
6: KEY
7: RESUME
8: TCP/IP
menu. Select number 1:
SET COMMUNICATION
1: OPTICAL
2: CONNECTOR
3: COM PORT
4: PROTOCOL TYPE
SET COMMUNICATION
1: PARAMETER
2: PROTCOL
<Serial No.> field and move cursor to
<On>.
<30>.
<Ignore>.
Quick Start
and
Optical
.
Choose the Protocol
<On>.
2-9