Denso Power Net Terminal BHT-103 Manual page 14

Terminal Setup
To set these addresses from the
Enter the name of each server, its IP Address and IP port (normally 23 for Telnet
servers), and emulation type. Then click on
Repeat this step for each Telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
button if you want to load an .svr file and use the
Load
save your file as an. svr file.
Setting Terminal Model and COM Port
The default serial connection to the Denso cradle is through
Denso terminal model and keypad, or to change the
Options
To maintain compatibility with existing Denso Telnet client keyboard layouts, a specific
terminal model and keypad must be selected from the Terminal Model window.
2-6
Settings
menu as shown.
menu, click on Servers
.
OK
Edit button to make the corrections. Use the
Save As
COM1
COM
port assignment, click on the
Supported Equipment Manual
and then click on Add .
button if you want to
. To select a specific
• March, 2006