Advertisement
• ON/OFF function:
The scanner is in standby mode when the
Magic Key is off.
Transfer of selected characters
• The data to be transmitted (e.g. opera-
tion start codes) can be set beforehand
when the Magic Key is on
Retransmit scanned data
• Scanned data can be retransmitted when
the Magic Key is on without the bar code
having to be scanned again
Technical Data
Scanner
Readable Codes
Resolution
Image capture funktion
Focusing point
Marker
Scanning area (at Narrow bar 0,5 mm)
PCS value
Scanning angle (angle of elevation)
Skew angle
Elevation and inclination
Reading confirmation
I/F
Format/Connector Type/Cable Length
Operating Voltage Range
Input Power
Power Consumption
Power supply
Water proof
Environmental
Shock-resistant
Requirements
Operating Temperature Range
Operating Humidity
Operating ambient illumination
Weight (unit only)
(1): Ambient illumination 500 lux, ITF/16 columns on label, when PCS = 0.9.
(2): An attempt to make a connection may fail if the PC or USB hub used is not compatible. Check transfer compatibility.
User-friendly
User-friendly
Very practice-orientated
• Marking function (GT-10Q):
laser lighting of the scan area and its
centre point
• Vibrator function:
Completion of the scanning operation
confirmed with vibration
• Adjustable buzzer volume:
3 levels of buzzer volume to suit the
surrounding environment
• Very bright, three-colour LED:
Easy to read scanning information
GT-10B
GT-10B-SM
(Standard Range Type)
Bar Codes
EAN-13/8, UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5, STF, CODABAR (NW7), CODE39, CODE93,
CODE128 (EAN-128), MSI, Plessey
2 Dimensional Codes
Bar Codes
0.125 mm
2 Dimensional Codes
(1)
0 ~ 350 mm max
0.45 min
40° a 0°
Blue-green-red LED, buzzer (with volume control), vibrator
Multi Interface: programmable as RS-232C or keyboard interface
4.75 ~ 5.25 V
While Scanning: 200 mA max
IP 54 (Equivalent to JIS Splash resistance)
2 m (1 x 6 directions onto concrete floor)
0 °C ~ 50 °C
10 ~ 90 % RF (No condensation or frost)
500 lux ~ 10 000 lux (daylight florescent lighting)
Approx. 190 g (without cable)
Simple set-up with intuitive software
• Installation software included in scope of
delivery
• Easy parameter setting from a PC with
the set-up software
• Quick start programme:
Printing and configuring barcodes with
the aid of the special installation soft-
ware – the GT-10 is ready immediately
GT-10B-LM
(Long Range Type)
0.19 mm
0 ~ 700 mm max
(3)
(3): Test value, not guaranteed.
GT-10Q
GT-10Q-SR
GT-10Q-SU
(RS-232C)
(USB)
QR Codes, Micro QR Codes, DataMatrix
(ECC200), PDF417, Maxi Code,
RSS variants, Micro
0.15 mm
0.25 mm
Ja
100 mm
Scanning area marker
360 degrees
± 35 degrees
RS-232C/
USB 1.1 Compliant/
Dsub-9S
USB Typ A
AC adapter
Supply from
connected device
(2)
10 ~ 99 % RF
(No condensation or frost)
20 lux ~ 10 000 lux
(daylight florescent lighting)
Approx. 210 g (without cable)
Advertisement
