Dell OptiPlex 760 Service Manual page 43

8. Check all connectors to be certain that they are properly cabled and firmly seated.
9. Replace the computer cover (see
10. If the drive you just installed is the primary drive, insert a bootable medium into your boot drive.
11. Turn on the computer.
12. Enter system setup, and update the SATA port option under the Drives option list (see
13. Exit system setup, and reboot the computer.
14. Partition and logically format your drive.
NOTE: For instructions, see the documentation that came with your operating system.
15. Test the hard drive by running the Dell Diagnostics (see
16. Install your operating system on the hard drive.
NOTE: For instructions, see the documentation that came with your operating system.
Back to Contents Page
Replacing the Computer Cover).
Dell Diagnostics).
Entering System Setup).