Advertisement
Features
Standard Feature
Set
Software Bundles
DSU Functionality
CTP Manageability You can manage the Motorola Vanguard 100 from the CTP for configuration,
About the Vanguard 100
The Motorola Vanguard 100 base unit includes the following standard feature set:
• X.25 Service
• Frame Relay Service
• Asynchronous Protocol
• Transparent Polled Asynchronous Protocol
• Simple Network Management P rotocol
• Trivial File Transfer Protocol
Vanguard 100 offers multiprotocol access, that runs a variety of protocols depending
on which software bundle you choose. Information about the available software
bundles appears in the software release notice for the currently shipping software
release.
The DSU daughtercard provides a 56 kbps point-to-point DDS1 interface that
conforms to the AT&T 62310 or ANSI T1E1.4/91-006 standards.
The DSU is FCC Part 68-registered.
Diagnostic loopbacks from the telephone company are supported. You activate local
diagnostics from the Control Terminal Port (CTP).
reporting, and troubleshooting.
Vanguard 100 is available in two and three serial port versions. Ports have the
following characteristics.
Port Characteristics
Port
Connector
1
V.24: DB25
DSU: RJ48S
2
DB25
3
V.24: DB25
Interface
Default
DIM Site D/C Frame
Relay
DSU D/C
Frame
Relay
DIM on
Frame
motherboard
Relay
Motherboard
Async
Features
Speed
DTE/
DCE
115.2 kbps (async)
DCE
80 kbps (sync)
56 kbps (sync)
NA
V.24:
Select-
able
• 80 kbps (sync)
• 115.2 kbps
(async)
V.35, V.11, or V.36:
• 384 kbps int.
clocks
• 1.54 Mbps ext.
clocks
115.2 kbps (async)
DCE
80 kbps (sync)
1-3
Advertisement
