Table of Contents
Advertisement
Standard processing in SVP mode
FUNCTION =>
1
2
3
X EXECUTE
INIT CFR FILE NO. =>
CFR FILE NO. =>
0
1
2
3
"Comment" refers to the contents of the configuration file. This is entered by the service
department.
The service department can define configuration files in which links between two S130s
(Cluster 0 and 1) and two SSUs (SSU0 and SSU1) can be configured on ONL (online Y or
N).
A connection (CNCT C) is either set by the service department and IMPL (for OSD V1 and
V2) or (as of OSD V3) by operating system commands. figure 33 shows a configuration with
which a computer connection can be achieved via global storage (SCMP).
U25339-J-Z126-1-7600
The following functions are carried out by entering the appropriate
number:
DISPLAY CFR
INIT CFR FILE NO.
DISPLAY FILE
CL0-SS0, CL1-SS1
CL0-2SSU
CL1-2SSU
2CL-2SSU
displays current configuration
activates selected FILE after IMPL, enter a number
in the
INIT CFR FILE NO. =>
displays configuration file, enter a number in the
FILE NO. =>
executes the last function entered
Selection of a configuration file for function 2
Selection of a configuration file for function 3
configuration file 0 with comments
configuration file 1 with comments
configuration file 2 with comments
configuration file 3 with comments
field
field
User frames
CFR
73
Advertisement
Table of Contents
