Table of Contents
Advertisement
Switching the S130 on and off from the SKP
The "Switching on / off the host" form is displayed:
V7
By entering YES for one of the two questions at the bottom of the form followed by the
P2
ately. Press the
On no account should both questions be answered with YES. If a direct switching action
is initiated by the reply YES, another message appears, which should again be
confirmed with YES:
26
Information on operation of the FMLI interfaces can be found in the "SINIX-2000
V7.0" manual [1].
(
) key, you can specify whether the S130 can be switched on or off immedi-
CHOICES
(
SAVE
P3
) key after filling out the form.
U25339-J-Z126-1-7600
Advertisement
Table of Contents
