Table of Contents
Advertisement
User frames
EXECUTION
!
1
2
3
4
5
6
7
CPU SELECT => A particular CPU, displayed in the next frame line, can be selected here
0 ... 7
STOP/START MODE =>
1
2
48
The following functions are executed after the appropriate number is
entered in the input fields:
The functions are executed according to the entries in the CPU SELECT and
STOP/START MODE fields (see table on next page)!
CPU STOP
INTERRUPT
TOD ENABLE
SYSTEM RESET
SYSTEM RESET CLEAR
STORE STATUS
RESTART
for the functions in the EXECUTION selection menu (see above).
This can be used to indicate whether the functions in the EXECUTION
selection menu (see above) are to be carried out for all CPUs or only for
the CPU in the CPU SELECT field.
ALL CPU
TARGET CPU
Standard processing in SVP mode
stops either the CPU selected in the CPU SELECT
and STOP/START MODE fields or all CPUs
creates an external interrupt for the CPU(s) selected
in the fields CPU SELECT and STOP/START
MODE
time entry is enabled
all CPUs, IOPs, channels and controllers are reset
as 4; in addition, the working memory is erased
selected CPU is stopped, the status is stored
restarts selected CPU
Selection of a particular CPU
all CPUs are selected
only the CPU in the CPU SELECT field is selected
U25339-J-Z126-1-7600
Advertisement
Table of Contents
