Overview Of Setting Up The Trucluster Server Hardware Configuration; Failover Mode - Compaq TruCluster Server AA-RHGWC-TE Manual

Figure 1–8: NSPOF Fibre Channel Cluster Using HSG80s in Multiple-Bus

Failover Mode

Member
System
1
Memory
Channel
KGPSA
KGPSA
Fibre Channel Switch
Port 1
Port 1
1.6 Overview of Setting Up the TruCluster Server Hardware
Configuration
To set up a TruCluster Server hardware configuration, follow these steps:
1. Plan your hardware configuration. (See Chapter 3, Chapter 4,
Chapter 6, Chapter 9, and Chapter 10.)
2. Draw a diagram of your configuration.
3. Compare your diagram with the examples in Chapter 3, Chapter 6,
and Chapter 9.
4. Identify all devices, cables, SCSI adapters, and so forth. Use the
diagram you just constructed.
1–16 Introduction
Member
System
2
Memory Channel
Interface
Memory
Channel
KGPSA
KGPSA
Fibre Channel Switch
HSG 80
Controller A
Port 2
HSG 80
Controller B Port 2
RA8000/ESA12000
ZK-1765U-AI