Entering Titles; Clearing Titles - Clarion CZ309A Owner's Manual

Operations Common to Each Mode

Entering titles

Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
Mode
CD mode
TV mode
Radio mode
CD changer mode
DCZ625 connected
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [DISP] button for 1
second or longer.
4. Press the [x] or [v] button to select
"TITLE IN".
5. Press the [ ] button.
The display switches to the title input display.
6. Press the [x] or [v] button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters...
8. Press the [w] or [z] button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 8
characters for the title.
10.Press and hold the [
or longer to store the title into memory.
18
CZ309A
Number of titles
50 titles
20 titles
30 titles
Number of titles
100 titles
] button for 2 seconds

Clearing titles

1. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press and hold the [DISP] button for 1
second or longer.
3. Press the [x] or [v] button to select
"TITLE IN".
4. Press the [ ] button.
The display switches to the title input display.
5. Press and hold the [BND] button for 1
second or longer.
All characters in the title disappear.
6. Press and hold the [
or longer to store the setting.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is "MID".
1. Press and hold the [DISP] button for 1
second or longer.
2. Select "AUX SENS".
3. Press the [w] or [z] button to select
"HIGH", "MID" or "LOW".
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
] button for 2 seconds