Table of Contents
Advertisement
Operations Common to Each Mode
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is "MID".
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select "AUX
SENS".
3. Turn the [ROTARY] knob clockwise or
counterclockwise as needed and select from
"HIGH", "MID" or "LOW".
4. Press the [A] button to return to the previous
mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD changer and TV
stations. The number of titles that can be entered
for each mode are as follows.
Mode
TV mode
Radio mode
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
1. Press the [FNC] button to select the mode
you want to enter a title (Radio, CD changer
or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press the [DISP] button and display the main.
4. Press and hold the [A] button for 1 second or
longer.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [DISP] button to select a character.
Each time you press the [DISP] button, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the
desired character.
40
VXZ646
Number of titles
20 titles
30 titles
Number of titles
100 titles
100 titles
50 titles
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold the [
seconds or longer to store the title into
memory and cancel title input mode.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press the [DISP] button and display the main.
3. Press and hold the [A] button for 1 second or
longer.
The display switches to the title input display.
4. Press the [BND] button.
5. Press and hold the [
or longer to clear the title and cancel title
input mode.
Triggered audio mute for
cellular telephones
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular
telephones Contact your local authorized
Clarion dealer for information on proper
installation and compatibility.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices connected to this unit.
] button for 2
] button for 2 second
Advertisement
Table of Contents
