Before You Begin; Connecting The Handset - Cisco SPA 500 User Manual

Spa 500 series ip phones

Hide thumbs Also See for SPA 500:

Table of Contents

Installing Your Phone

Before You Begin

STEP 1

STEP 2

Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide

Before you install and connect your phone, verify with your System Administrator

(if applicable) that the network is ready for the phone, read the safety notices, and

make sure you have all the phone parts and documentation available.

Find the longer end of the coiled phone cord. Insert it into the back of the phone

base in the slot marked with a phone symbol. This port is labeled #5 on the

SPA 525G IP Phone Connections

Insert the short end of the handset cord into the jack at the bottom of the handset

(not shown).

NOTE: The RJ-11 port marked "AUX" is

reserved for connection with the Cisco SPA

500S Attendant Console that works with the

Cisco SPA 525G. It is not for use as a telephone

line port.

CAUTION: Do not plug a telephone line cord

into the port marked "AUX."

graphic.

Cisco

Table of Contents

Spa525g - small business pro ip phone voip