View Base Statistics; Before You Begin - Cisco 6800 Series Administration Manual

View Base Statistics

Step 4
Click Save/Start Update.
Step 5 Click Save in the pop-up window.
Step 6
In the warning window, click the browser Back arrow.
Step 7 Wait a few seconds, then click Syslog.
Step 8
Verify that you see the message Firmware upgrade started to version vvvv branch bbbb
for handset: x.
Where:
• vvvv is the version number.
• bbbb is the branch number.
• x is the handset number.
You should see one message for each handset registered to the base station. If you don't see this message,
there may be error messages.
Step 9 Click Extensions.
The FWU Progress column displays the downgrade status. Refresh your browser to monitor the progress.
Step 10
If you see the message Waiting for charger, put the handset in the charging cradle.
Caution
View Base Statistics
You should check the statistics stored in the base station on a regular basis. If you see problems, you can
proactively identify and address any issues. The page contains statistics for:
• System
• Calls
• DECT

Before you begin

Connect to the base station web page as described in
The base station needs to be connected to the network and the green LED lit.
Procedure
Step 1
Click Statistics.
Step 2 Click the links to view the different base station statistics, as described in
130.
Cisco IP DECT 6800 Series Administration Guide
160
Don't remove the handset from the charger until the downgrade completes. At the end of the
downgrade, the handset reboots before it can be used.
Sign in to the Administration Web Page, on page
Statistics Web Page Fields, on page
Maintenance
42.