Install Proset Software And Test The Adapter - Acer M9N System User Manual

4.3.3

Install PROSet Software and Test the Adapter

Although not required for operation, it's a good idea to run diagnostic
tests every time you install an adapter. Intel's PROSet program is an
enhanced configuration and diagnostics utility for Windows 95. To
install PROSet:
1 Insert the Intel Configuration and Drivers disk.
2 From Explorer, double click on the 3.5 Floppy disk icon.
3 Find the PROSet icon and click the right mouse button. From the
menu that appears click Install.
4 The PROSet files are copied to your hard disk.
5 Start PROSet by double-clicking on the Intel PROSet icon in the
Control Panel.
6 The PROSet software examines your computer and displays the
PRO Adapter Setup Window. This window shows the adapter's
I/O address, interrupt, and Ethernet address.
7 Click Test to begin diagnostics.
There are two testing options. Testing with the NDIS driver checks
overall operation of the adapter with the network. The second option
tests the adapter hardware only. Read both sections below before
testing.
Test the adapter and driver together
The adapter and driver test doesn't require you to unload the
NDIS driver. You don't need to restart after testing.
1 Click Test NDIS.
2 When the test is complete, click OK to exit.
3 If this test fails, try again, unloading NDIS first.
LAN Information 4-9