Table of Contents
Advertisement
B
U
T
EFORE
SING
HE
Installing New Navigation System Software
If a different version of the map disc has been used with your navigation system, the operating
system program installed will be rewritten automatically to read this SMART MAP PRO disc.
1
Remove the different version of the map disc from
your navigation system. Insert this SMART MAP
PRO disc.
The display shows "Please insert DVD-ROM/ map data
disk." Insert the DVD-ROM disc into the NVE-N851A/
NVE-N852A Series Navigation System. (For instructions
on inserting and removing the DVD-ROM disc, refer to
the NVE-N851A/NVE-N852A Series Hardware Manual.)
2
The opening screen appears on the monitor display.
If a CVA-1003/CVA-1005/CVA-1006/IVA-C800/IVA-C801
type system control monitor is used, you may not see this
screen.
3
A disclaimer screen appears. Please read this
important information. Press the ENTER button on the
remote control if you accept this statement.
4
Once the ENTER button on the remote control is
pressed, the map screen will appear on the display.
The vehicle's present location is indicated. If the
vehicle's present location is incorrect, drive the vehicle
several miles in an area with an open view to sky. This
will correctly synchronize the navigation system.
When powering on the unit for the first time, it takes the
GPS receiver approximately 10 minutes to calculate the
vehicle's current position. During this period, the vehicle
position icon may not move even if the vehicle is being
driven.
6
S
YSTEM
Installation Progress
Advertisement
Table of Contents
