Alpine DVA-5200 Owner's Manual page 19

Use the number keys
("0" to "9") to input the
title number.
Note: Press "RETURN" during this process to
return to the previous mode.
Press "ENTER".
The chapter input mode is set.
Number of chapter number allowed to input.
(In this case the chapter number can be
selected between 1-34.)
Use the number keys
("0" to "9") to input the
chapter number.
Programmed playback
Press "ENTER".
1 2 3
The program input mode is
4 5 6
ended. To continue programming,
7 8 9
press " 9 " to change the program
0
number, then repeat steps 2 to 5.
Up to 20 titles, chapters and
tracks can be programmed.
Note: If you want to program more than 10 titles,
chapters and tracks, press " 9 " after
programming the 10
then press "ENTER". The program menu for
step numbers 11 to 20 appears.
ENTER
Press " : ".
Playback begins in the pro-
grammed order.
Note: If "PROG" is pressed after inputting the
program, the program menu turns off, but
the program is stored in the memory.
Notes:
1 2 3
• For video CDs and CDs, input the track numbers
4 5 6
(in the same way as for DVDs).
7 8 9 • For DVDs, the program menu reappears once
programmed playback is finished. For video CDs
0
and CDs, the program is played repeatedly.
• The program can be checked during programmed
playback by pressing "DISP" twice. For details,
refer to "Displaying the disc status" (pages 24 and
25).
ENTER
th
step to select "NEXT",
19