Changing The Display Setting - Alpine DVA-5200 Owner's Manual

• Audio output/Optical digital audio output
Audio recording
Disc
format
DVD Dolby Digital
Linear PCM (48 kHz)
Linear PCM (96 kHz)
Video CD MPEG
CD Linear PCM
Changing the display
setting
Use the following procedure to set whether or
not the product's LED indicators are on or off.
Select "DISPLAY" under "Chang-
ing the default settings (SET
UP)" on page 26.
Use the " 8 " or " 9 " key to select
the "ON" or "OFF", then press
"ENTER".
or
Changing the digital output setting

Changing the display setting

Optical digital audio output
Digital output
(when a DVD sound
setting
processor is connect)
AUTO
LPCM
AUTO
LPCM
AUTO
LPCM
AUTO or LPCM
AUTO or LPCM
ON
The LED indicators are lit, indicating the
product's operating status. "ON" is selected
upon shipment from the factory.
OFF
The LED indicators are turned off.
When "OFF" is set, the indicators do not light
even when the power is on.
Note: Press "RETURN" to return to the previous
ENTER
Analog audio output
Dolby Digital
LPCM (48kHz)
LPCM (48kHz)
LPCM (48kHz)
x
x
LPCM (44.1kHz)
LPCM (44.1kHz)
screen.
Press "SET UP".
The settings are stored and the
set up mode is canceled.
SET UP
(Ai-NET output)
\
\
\
\
\
\
\
\
SET UP
SET UP
33